Sealbhóir scagaire diosca membrane cruach dhosmálta 142mm le haghaidh iarratas saotharlainne. Sealbhóir scagaire diosca cruach dhosmálta le haghaidh membrane scagaire 142mm, déanta as 316 cruach dhosmálta
GLANADH AGUS COTHABHÁIL
• Disassemble the entire unit:
• Inspect screens for nicks or rough edges and check O-rings and gaskets for cracking and loss of
leaisteachas.
• Carefully remove O-rings with blunt-tipped forceps.
• Rotate (flip over) PTFE gasket (this minimizes flattening on the side in contact with the membrane).
• Clean all components with a standard, non-abrasive laboratory detergent:
• Threaded connections may be cleaned with a stiff-bristled brush.
v Is féidir naisc sláintíochta, scáileáin tacaíochta PTFE, agus dromchlaí taobh istigh a ghlanadh le spúinse nó
éadach neamh-scríobach.
• Rinse with hot tap water followed by a final rinse with distilled or deionized water.
• To sterilize:
• Assemble a completely dry filter with membrane. Attach hoses and clamps to holders. Tubing/hoses
Ba chóir go mbeadh níos lú ná nó cothrom le 3 troigh ar fad (1 méadar) agus ní mór a bheith go hiomlán tirim. Teanntáin séalaithe
chóir a bheith finger tight ach amháin le linn tionóil.
• Wrap both inlet and outlet hoses with steam permeable paper.
• Autoclave the holder at 121 C (250 F) for the time listed in the table below. Slow exhaust only.
Clibeanna Te: cruach dhosmálta sealbhóir scagaire diosca membrane 142mm, monaróirí, sláintíochta, cruach dhosmálta, grád bia
